Decal Installation:
Top Line
Be sure that the surface is cleaned before applying graphics. A mildly soapy water solution may be used to clean the surface. For better results, rubbing alcohol (isopropyl/isopropanol) can be used additionally. Avoid using ammonia-based cleaners, as this can cause long term issues with the film and adhesive.
Step 1
Align legend on application surface and tape into position using top horizontal hinge method.
Step 2
Cut between each letter or number so that each is independently hinged from top.
Remove liner, then resqueegee letter or number into place using firm pressure.
Follow above procedure for each remaining letter or number.